BIPAP – Devilbiss SleepCube AutoBilevel
With an auto-adjusting algorithm that constantly monitors for apneas and events, the SleepCube AutoBilevel adds an extra level of comfort for those who require higher pressures.
- The SleepCube AutoBilevel adds an extra level of comfort for Bilevel users.
- Traditional BiLevel therapy uses a higher fixed level of inspiratory pressure (IPAP) and a lower expiratory pressure (EPAP) to prevent apnoeas, hypopnoeas or snoring. Using our ‘proven’ auto-adjusting algorithm the AutoBilevel constantly monitors for apnoeas and events. Upon their detection the Bilevel pressure automatically adjusts to deliver the best possible treatment during sleep.
- This is especially useful and comfortable for those users who require high pressures.
- BIPAP automatically adjusts in response to events while the pressure support setting ensures the EPAP stays below the IPAP by a constant amount
- Pressure range of between 3 and 25 cmH2O in both BiLevel and CPAP mode
- Smallest footprint of all leading CPAP devices with heated humidification system attached
- SmartCode remote data compliance feature included, which encodes usage data into a series of letters and numbers that can be easily decrypted using free software or online at http://www.sleepcube.com
- Among the quietest CPAPs on the market – only 26 dBA
- Can be operated from a 12V DC source such as that found in a motor home (not with heated humidifier) and will switch automatically to AC power if connected and available
- Auto-switching universal power supply of 100 – 240 V and 50 – 60 Hz, and automatic altitude compensation between 0 and 2600m (9000ft)
- Large backlit LCD and easy to follow patient menu
- Auto on/off automatically starts the flow of air on breathing into the mask and stops the flow of air when mask is removed
- Delay pressure ramp eases the device to the prescribed pressure. Ramp delay settings of 0 to 45 minutes in 5-minute increments
- Visual mask off alert feature
- Supplied with 6ft tubing as standard. Optional 10ft patient tubing available
- Large slip-resistant pads on bottom of unit minimise movement on the bedside table during the night
- Patient air tubing extends from the back of unit to enhance visual appeal
- Integrated heated humidification system easily docks onto the bottom of the unit without requiring a separate hose or power cord
- SmartLink module and software available for more detailed patient therapy management. Data is transferred to the PC via SD card for further analysis and reporting using the SmartLink software package.
- Flow rounding comfort feature included
- Integrated event detection feature
- Real-time display – LCD display shows actual pressure, leak rate and patient breathing parameters such as breath rate, I/E ratio, minute volume and tidal volume
|Dimensions (WxDxH)||17.5 cm (7″) x 16.5 cm (6.5″) x 10.7 cm (4.2″)|
|Pressure Range||3 – 25 cmH2O|
|Sound Pressure Level||26 dbA|
|Maximum Power Consumption||65 Watts|
|Average with / without Humidifier||28 Watts / 12 Watts|
|Power Supply||100 – 240 V, 50/60 Hz|
|Total weight||1.22 kg (2.7 lb)|
There are no reviews yet.